Hi.
Yes, I believe the TS2000S is set up the same way, although I haven't
looked at the menus again, once I configured it the way that I wanted
it. The MCP2000 software from Kenwood made setting up the menus on the
TS2000S a snap.
73, de Lou K2LKK
At 10:26 PM 1/5/2008 -0500, you wrote:
>Lou,
>
>There is a menu setting, but it determines which speaker is connected to
>which radio. As soon as you plug both external speakers in, they are both
>active.
>
>Steve
>
>----- Original Message -----
>From: "Lou Kline" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Saturday, January 05, 2008 17:20
>Subject: Re: monitoring both VFO A and VFO B simultaneously on TMV71A
>
>
> > Hi.
> >
> > If it is like my TS2000S, there should be a menu setting that allows you
> > to
> > direct the main and sub-receivers to separate speakers. I bet Kenwood did
> > it that way on that radio, also.
> >
> > 73, de Lou K2LKK
> >
> >
> >
> > At 11:49 PM 1/4/2008 -0500, you wrote:
> >> Lowell:
> >>
> >>But, can't you monitor both VFO's on your radio using separate
> >>speakers--one for each VFO?
> >>
> >>I swear I did it once with the TMV71A somehow!
> >>
> >>73 from Tom Behler: KB8TYJ
> >>
> >>----- Original Message -----
> >>From: "Lowell Miller" <[log in to unmask]>
> >>To: <[log in to unmask]>
> >>Sent: Friday, January 04, 2008 9:51 PM
> >>Subject: Re: monitoring both VFO A and VFO B simultaneously on TMV71A
> >>
> >>
> >> > Hi Tom:
> >> > Well, on my TM-D710A, the brother to your radio, I monitor both bands
> >> > at
> >> > the
> >> > same time with one speaker.
> >> > I thought that was the default setting.
> >> > Try a reset.
> >> > 73
> >> > Lowell W8QIY
> >> > ----- Original Message -----
> >> > From: "T Behler" <[log in to unmask]>
> >> > To: <[log in to unmask]>
> >> > Sent: Friday, January 04, 2008 9:16 PM
> >> > Subject: monitoring both VFO A and VFO B simultaneously on TMV71A
> >> >
> >> >
> >> >> Hi, folks.
> >> >>
> >> >> I am having a real brain freeze here, and could use some help.
> >> >>
> >> >> I could swear that, at some point, I had figured out a way to monitor
> >> >> both
> >> >> VFO A. and VFO B. simultaneously with the TMV71A, but I now can't
> >> >> seem
> >> >> to
> >> >> remember how I did it.
> >> >>
> >> >> I have two external speakers, and can get either one or the other VFO'
> >> >> to
> >> >> work separately, but not simultaneously. I want to monitor our local
> >> >> 2-meter and 440 repeaters simultaneously if possible.
> >> >>
> >> >> What am I missing here?
> >> >>
> >> >> 73 from Tom Behler: KB8TYJ
> >> >
> >> >
> >>
> >>
> >>
> >>
> >>--
> >>No virus found in this incoming message.
> >>Checked by AVG Free Edition.
> >>Version: 7.5.516 / Virus Database: 269.17.13/1210 - Release Date: 1/5/2008
> >>11:46 AM
> >
> > Louis Kim Kline
> > A.R.S. K2LKK
> > Home e-mail: [log in to unmask]
> > Work e-mail: [log in to unmask]
> > Work Telephone: (585) 697-5740
> >
> >
> >
> >
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.516 / Virus Database: 269.17.13/1213 - Release Date: 1/7/2008
>9:14 AM
Louis Kim Kline
A.R.S. K2LKK
Home e-mail: [log in to unmask]
Work e-mail: [log in to unmask]
Work Telephone: (585) 697-5740
|
