It could be a problem if bothn of your CD's are connected to the same IDE
port. My CD-RW will not do a direct copy with my CD's set that way,
something to do with the disk cache.  Try to copy to a temp file on the hard
drive first.

HTH

Mike
[log in to unmask] <mailto:[log in to unmask]>


-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Jal E. Montero
Sent: Sunday, September 24, 2000 7:10 PM
To: [log in to unmask]
Subject: [PCBUILD] pc crashing when copying CD to CD


Help please. . .
I just bought a Plextor 12/10/32A CD-Writer and was trying to duplicate a
disk using Adaptec's CD Copier software.  While it tries to grab the
information on both the Plexwriter and my regular CD drive from Leoptics, it
crashes my system, and I get the blue screen and message, "a fatal exception
0E has occurred at 0028-C29CAC8F. The current application will be
terminated."  When I try to hit my escape key, I get a box saying, "Cd
Copier cannot find Easy Cd Creator.  Please re-install Easy Cd Creator."
After hitting Ok, I get another box telling me that CD Copier cannot locate
a supported CD-ROM reader.  You will not be able to make disk to disk
copies."  I also found out that my power suppy only has 200W watts of power.
Can this be causing the problem?  I have tried different ribbon cable
configurations and
jumper settings too but to no avail.

I'd appreciate very much any help or tip on this proplem.

Many thanks,
Jal

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>