BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Steve Forst <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Wed, 17 Dec 2014 11:04:31 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines)
That's a good idea.   Something in the electric fence area may be just 
what you need.

I was also thinking of something homebrew.   Maybe screw eye into the 
wood, then  attach  an insulator  with short piece of dacron rope.  Or 
use pliers to open up the screw eye enough to slip it through  one of 
the holes of a  regular insulator.

Good luck, Steve KW3A

On 12/17/2014 10:12 AM, Jim Shaffer wrote:
> Ron, you might check your local store serving farmers.  Farmers use
> stand-off insulators for their electric fences, and they might have the
> variety you want.
>
> -----Original Message-----
> From: Dr. Ronald E. Milliman]\\`
> Sent: Wednesday, December 17, 2014 9:03 AM
> To: [log in to unmask]
> Subject: standoff insulators
>
> Take #3...
>
> I have looked and looked for a type of standoff insulator and cannot =
> find
> them. I have even written to The Wireman and a few other possibl =
> sources,
> and nobody seems to have what I am looking for. So, I=92m coming back to =
> my
> =93ace in the hole=94 resource, this super list.=20
>
> I am trying to find a source for standoff insulators that are about 1 =
> =BD=94 or
> so long, have a screw or threaded base that will allow me to screw it =
> into
> wood, and is rounded or looped on the other end, like an eye bolt, but =
> that
> end also has an insulator material, like ceramic or Bakelite, or similar
> polymer with a small hole in the center through which I can thread wire,
> like a #12 vinyl coated wire. I have seen such insulators in my life. In
> fact, I have used them before, but that has been a long time ago. The =
> length
> is not too important; though I would like them to not be more than about =
> 2=94
> long.
>
> I hope my description is sufficient to facilitate your being able to
> visualize and understand what I am trying to find. Do any of you have =
> any
> suggestions where I can locate such standoffs? I am working on an
> experimental antenna and need them to thread my antenna wire through.=20
>
> TNX,
> Ron, K8HSY
> =20
>
> Dr. Ronald E. Milliman
> Retired Professor of Marketing
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> http://www.avast.com
>
>
>

ATOM RSS1 RSS2