BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
For blind ham radio operators <[log in to unmask]>
X-To:
[log in to unmask]
Date:
Tue, 22 Sep 2015 10:35:15 -0400
Reply-To:
For blind ham radio operators <[log in to unmask]>
Subject:
Re: Hex beam and what rotor?
MIME-Version:
1.0
Message-ID:
<DB0075CA4C0A4D7CA40B5AD372D235BF@LowellDell>
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; format=flowed; charset="iso-8859-1"; reply-type=original
From:
Lowell Miller <[log in to unmask]>
Parts/Attachments:
text/plain (27 lines) 
Hello Brian,
I just put up a hex beam on a 35 foot mast.
I am using a Yaesu 450 rotor with the mast setting on the rotor mounted at 
ground level. I have a bearring at the top of the house to allow the mast to 
turn.  The bearing came from yeasu as well.  This cuts down the wind 
resistance and weight at the top.  This is working very well for me.
Give it a try!
Best 73.
Lowell  W8QIY
----- Original Message ----- 
From: "Brian Horst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, September 21, 2015 10:17 AM
Subject: Hex beam and what rotor?


> Hi,
>
> I want to buy a hex beam but am unsure of what rotor to use.  I want to 
> mast
> mount the rotor and am open to suggestions of what to use>for the rotor?
>
> Some have said the Alliance U-100 would work but then others say "not" any
> suggestions from those using a similar set up?
>
> Brian, [log in to unmask]

ATOM RSS1 RSS2