That's exactly the beam I have. Someone gave it to me, it was a mess when I 
got it but I cleaned it up and hope to have it up by the end of the month. 
My main thing is the rotor I ended up with, another freebie, is a lot 
heavier than I need and way too heavy for the mast I have so I need to beef 
up the mast a little or change where I'm going to put it, but either way I 
plan to test it this week, make sure I got it back together right and then 
it's just a case of coming up with the time and heavier mast. The beam is 
very light but one of my friends got a couple Ham M rotors for very dirt 
cheap and gave me one. I won't know which way it's pointed I suppose but I 
wasn't passing something like that up for free. The main issue is I need to 
get the panel off to where the control cable hooks to the rotor and probably 
drill new holes because those screws are going to never come out of there 
and the clamp to the antenna's mast is missing so I'll have to fabricate 
something but plans for both are in the works and shouldn't take long.
----- Original Message ----- 
From: "Junior Lolley" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, August 03, 2014 7:32 AM
Subject: Re: Kenwood TS2000


> John, sounds great I believe in the near future I am looking at putting up 
> a
> 13b2 at the top of the tower for 2 meters.
>
>
> Junior Lolley kg4itd
> Liberty County Emergency Coordinator.
> "The 3 C's of life: choices, chances, and changes. You must make a choice 
> to
> take a chance or your life will never change."
>
>