I'll give that a try first thing when I get the antenna back up.

Tom


Tom Brennan  KD5VIJ, CCC-A/SLP
web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html

On Wed, 17 Apr 2013, Steve wrote:

> Date: Wed, 17 Apr 2013 16:54:29 -0400
> From: Steve <[log in to unmask]>
> Reply-To: For blind ham radio operators <[log in to unmask]>
> To: [log in to unmask]
> Subject: Re: mfj 931
>
> Tom,
>
> Take a small piece of hookup wire, run it from a screw on the mike case and
> route it through your curly cord and attach it to one of the screws on the
> side of the rig.
>
> ----- Original Message -----
> From: "Tom Brennan" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, April 17, 2013 2:26 PM
> Subject: Re: mfj 931
>
>
> > Howard, I have a Kenwood ts2000 running from a home brew 24 amp power
> > supply.
> >
> > The mic connection is the one that comes on the 2000 and is unmodified.
> > The mic
> > is a Heil dx mic.
> >
> > The mic has a metal case so you pretty much can't touch the mic without
> > touching
> > metal except the ptt button which is plastic.
> >
> > I've been careful to touch the radio itself on unpainted surfaces even to
> > pulling its cover and don't get a shock from it.
> >
> > I'll have to do the meter measure in a couple days.  I don't have an
> > antenna on
> > it right now as I have to get it back in the air which I'm hoping to do in
> > the
> > next couple days when this 35mph wind we have lets up.
> >
> > Tom
> >
> >
> > Tom Brennan  KD5VIJ, CCC-A/SLP
> > web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html
>