Steve, The tones are the same. I am going to need to forget about the
receive one I guess. It just seemed interesting that the 2000 allows you to
have both turned on at the same time but the 480 doesn't. Now it has been
pointed out to me that if I use the PC controls for the 480 I might be able
to do something different. I don't believe that but there are functions, I
am told, that are available for the 2000 through the software interface that
aren't from the front panel. It may be true for the 480 also.
At any rate, this has certainly started more discussion than I expected. I
must also say that I have learned a great deal from the discussion and that
is why I started it.
73,
Bob
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Dresser
Sent: Monday, November 05, 2012 4:39 PM
To: [log in to unmask]
Subject: Re: TS480/SAT in FM operation
Bob,
I'm pretty sure the 480 transmits the tone, but the catch is that the PL and
CTCSS tones have to be the same. Bottom line: if your repeater is using a
different tone to activate your receiver than the one it requires you to
transmit, you're out of luck. The simplest solution is to ignore the
receive (CTCSS) tone.
Steve
----- Original Message -----
From: "Bob Ray" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, November 05, 2012 16:18
Subject: Re: TS480/SAT in FM operation
> John, That is what we are trying to do. Now my neighbor has a TS2000 and
> it
> works the way you described it. With the 480 when you switch to CTCSS it
> no
> longer transmits the tone.
>
> Bob
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of John Miller
> Sent: Monday, November 05, 2012 2:56 PM
> To: [log in to unmask]
> Subject: Re: TS480/SAT in FM operation
>
> PL and CTCSS is exactly the same thing, what you're talking about is
> something else but that doesn't make sense at all. If you need a split
> tone,
> in other words different from receive to transmit, set the transmit tone
> and
> leave receive tone off, you'd be out of luck and that would be crazy since
> only commercial radios do that as far as I know though I did trick a ham
> radio to do it once. Anyway, as long as the tone is the same for in and
> out,
> when you turn on tone squelch, so you need a tone to receive the repeater,
> it will transmit that same tone when you transmit so you have the tone set
> for receive and transmit that way.
> ----- Original Message -----
> From: "Bob Ray" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Monday, November 05, 2012 3:34 PM
> Subject: Re: TS480/SAT in FM operation
>
>
>> PL tones are the tones going into the repeater. CTCSS are those
>> transmitted by it. That is the best explanation I can come up with
>> that makes sense to me.
>>
>> Bob
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators
>> [mailto:[log in to unmask]]
>> On Behalf Of Lou Kolb
>> Sent: Monday, November 05, 2012 2:32 PM
>> To: [log in to unmask]
>> Subject: Re: TS480/SAT in FM operation
>>
>> Bob,
>>
>> I thought they were the same. Perhaps I'm misunderstanding what you
>> mean by ctcss and Pl tones, but I thought both those terms refered to
>> a tone that's transmitted continuously as long as the transmitter is
>> up to hold the squelch open on the receiving end. I'm sure someone
>> will correct me if I'm wrong. 73, Lou Lou Kolb Voice-over Artist:
>> Radio/TV Ads, Video narrations
>> Messages On-hold:
>> www.loukolb.com
>> ----- Original Message -----
>> From: "Bob Ray" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, November 05, 2012 3:11 PM
>> Subject: TS480/SAT in FM operation
>>
>>
>>> Anyone that has experience with the 480 on fm repeaters may be able
>>> to help with this. We have just added tones to our local repeater.
>>> The
>>> 480 manual, if I am reading it right, doesn't allow you to have a pl
>>> tone and a CTCSS tone at the same time. Does anyone have a work
>>> around for this?
>>>
>>> Bob kd0br
>>
>
|
