No, I had to buy a pro-164 to replace it.
----- Original Message ----- 
From: "Michael Thurman" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, August 11, 2010 3:17 PM
Subject: Re: Uniden bcd996 Serial Control


> did they give you moey back on the old radio that radio shack all along =
> said WOULD support rebanding back whe it was first brought up? if not =
> what are you goigto do with it? rebanding is not an issue here anytime =
> in the forseeable future as the viper p25 system is in place and running =
> fine from what they ell me
>
> On Aug 10, 2010, at 11:56 AM, John Glass wrote:
>
>> I am curious to know what rebanding means?
>>=20
>> John
>>=20
>>=20
>> ----- Original Message -----
>> From: Russ Kiehne <[log in to unmask]>
>> To: unknown [log in to unmask]
>> Date: Tuesday, Aug 10, 2010 8:38:41
>> Subject: Re: Uniden bcd996 Serial Control
>>=20
>>>=20
>>>=20
>>> That is good news.  I just had to buy a new scanner because my 
>>> pro-97=20=
>
>>> doesn't support rebanding.  I replaced it with a pro-164 which is a =
> direct=20
>>> replacement for it and supports rebanding.
>>> ----- Original Message -----=20
>>> From: "Martin McCormick" <[log in to unmask]>
>>> To: <[log in to unmask]>
>>> Sent: Tuesday, August 10, 2010 8:17 AM
>>> Subject: Re: Uniden bcd996 Serial Control
>>>=20
>>>=20
>>>> Russ Kiehne writes:
>>>> ar Does it support rebanding?
>>>>=20
>>>> Yes. It has some flash eprom that apparently can be updated.=20