PCBUILD Archives

Personal Computer Hardware discussion List

PCBUILD@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ron Harris <[log in to unmask]>
Reply To:
Personal Computer Hardware discussion List <[log in to unmask]>
Date:
Thu, 17 Apr 2008 19:01:37 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (40 lines)
No the systems are stock, same as the day they arrived. Thanks for the reply.


----- Original Message ----
From: Paul Hachmeyer <[log in to unmask]>
To: [log in to unmask]
Sent: Thursday, April 17, 2008 5:14:19 PM
Subject: Re: [PCBUILD] EVO D530 Restore Problems

Have there been any hardware changes to all the machines?  I had a 
recent problem with my Compaq where it didn't seem to like the nic or 
the video card added later when the on board connections failed.  In my 
case, I ran the restore, shut down the pc instead of rebooting or going 
into setup, removed the 2 cards then rebooted.  Waited about 4 or 5 
minutes for the windows setup to complete, shut down again.  Then 
reinstalled the nic and video cards.
Paul Hachmeyer

Ron Harris wrote:

>At my work we have about 5 older Compaq EVO D530 business towers that were replaced. We need to wipe the hard drives and restore the OEM Windows XP Pro on all the computers before we can donate or sell them off to employees. The Quick Restore Disk works fine and the Windows XP Pro restores fine from the disk, it copies down all the information, ejects the disks and reboots. BUT when the computers restart for  the Windows XP Pro installation they ALL stop at the same EXACT spot and go no further! I also believe it has to do with some software being installed along with Windows not the OS itself because if we restart the computers we can enter them into safe mode before the installation continues at the last point it was at ( the stopping point I stated earlier), and everything looks to be fine from there, but if we exit to restart normally, back to the faulty installation process it goes.
>
>
> 
>  
>

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                  http://freepctech.com/pcbuild.shtml


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcbuild.shtml

ATOM RSS1 RSS2