I goofed again, press "F" then crank the memory up to the empty channel and
finish the store by pressing Mem again.

Sorry for confusion, -Ken

-----Original Message-----
From: Blind-Hams For blind ham radio operators
[mailto:[log in to unmask]] On Behalf Of Ray T. Mahorney
Sent: Monday, June 06, 2005 10:43 AM
To: [log in to unmask]
Subject: Re: putting TMV7A in "lock" mode


Function mem overwrote a memory channel.  What did I do wrong?
Ray T. Mahorney
WA4WGA

----- Original Message -----
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, June 06, 2005 10:39
Subject: Re: putting TMV7A in "lock" mode


Let's say the last memory you have programmed is #9 and memory #10 is =
empty.
Go to memory #9, then go to the VFO and set it up.  When your ready to =
store
the VFO into #10 do this.

Press F then Mem, next with the tuning dial crank it  up once to #10 and
press Mem again to complete the store.

You can get to the programmable band edges by going to memory #1, then
cranking the dial down once for the upper band limit (U3)  or twice for =
the
lower band limit (L3).  There are three lower and upper band edge pairs.

73, Ken -N5SWR

=20

--=20
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005
=20





--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.3 - Release Date: 6/6/2005

--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005