Function mem overwrote a memory channel. What did I do wrong?
Ray T. Mahorney
WA4WGA
----- Original Message -----
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, June 06, 2005 10:39
Subject: Re: putting TMV7A in "lock" mode
Let's say the last memory you have programmed is #9 and memory #10 is =
empty.
Go to memory #9, then go to the VFO and set it up. When your ready to =
store
the VFO into #10 do this.
Press F then Mem, next with the tuning dial crank it up once to #10 and
press Mem again to complete the store.
You can get to the programmable band edges by going to memory #1, then
cranking the dial down once for the upper band limit (U3) or twice for =
the
lower band limit (L3). There are three lower and upper band edge pairs.
73, Ken -N5SWR
=20
--=20
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.2 - Release Date: 6/4/2005
=20
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.6.3 - Release Date: 6/6/2005