Mark,
The drive can be used in both, but device drivers must load either way. In
other words, you need to load drivers in your Autoexec.bat file when booting
to DOS. You cannot use a lot of the fancier functions in DOS, but it
doesn't sound like your going to need them for this application anyway.
WARNING: The 250MB drive can use 100MB disks, but if you try to format a
100MB disk in a 250MB drive you won't be able to read or write to it in
either. HTH.
Kyle
From: "Mark Rode" <[log in to unmask]>
Sent: Monday, May 29, 2000 4:08 PM
Subject: [PCBUILD] Iomega Zip drive questions.
><<snip>>
> Questions:
> Can a zip drive work like this in both DOS and Windows 98 ....in other
> words if there is no desire to hot swap drives must device drivers be
used..
>
> Can a 250 MB drive use smaller cartridges...like 100 meg ones ?
>
> Any Iomega Zip drive comments or advice appreciated.
>
> m
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>