I'd have to agree with Drew, SDRAM may cause some
problems at 133 Mhz. Have you checked into RDRAM ?
This is rated 800 Mhz and performs well at 133 Mhz
according to a review at Gamespot.
-yui shin
----- Original Message -----
Drew Dunn wrote:
> It *may* work. A 133MHz front side bus really needs 133MHz memory, but
> sometimes the 100MHz memory will work OK at faster speeds. You probably
> won't damage the DIMM by running it fast, but if it doesn't work, you'll
> notice odd behavior from your computer.
> -----Original Message-----
> Subject: [PCBUILD] 133MHZ Combination?
>
> I just purchased the following items to build a PC with. They are as
> follows:
> Motherboard: Abit BE-6 II
> CPU ----------: Pentium III 600B/133MHZ FSB
> Ram ----------: 128MB PC100
> I am wanting to set the FSB speed on the motherboard to 133MHZ.
> The vendor tells me all these items will work together and operate at
> 133MHZ.
> Can I get an opinion on this combination?
PCBUILD's List Owner's:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>