Sat, 15 Jan 2000 14:30:38 -0600
|
From: Jerry Rasmussen :Subject: [PCBUILD] HP Pavilion 6545C won't shutoff
> Hi gang,
> A client just purchased an HP Pavilion 6545C computer and brought it to me
> to load up a pile of software titles, install a NetGear FA310TX NIC, and
do
> some organization for him. I setup a permanent swap file, installed all
of
> the software, installed the NIC, installed all windows 98 SE updates,
> updated Office 97 to SR-2b, ran ScanDisk and DeFrag. After I finished all
> of that, I shut down the computer. But, it hangs at the "Windows is
> shutting down" screen. The only way to get it to shut off is yanking the
> plug or holding the OFF button in for 5-10 seconds. Upon reboot,
everything
> is OK - no Scandisk or any note of not closing Windows properly. I have
> repeatedly shutdown and rebooted with it consistently freezing at the
> shutting down screen. I went to the HP 6500 Series Users Forum and saw at
> least 6 postings describing the same problem. Some suggestions, none of
> which helped. One was to disable hardware power control in BIOS, which I
> did.
>
> HP Pavilion 6545C with 500MHz Celeron / 128kb cache.
> 64 MB RAM (factory installed)
> 13 GB Western Digital HD (factory installed)
> HP CD-RW (factory installed) drive
> Video is on the motherboard
> USR modem (factory installed)
> Netgear FA-310TX network card (I installed)
> HP expanded (internet/cd/plus) keyboard
> HP wheel mouse.
> Windows 98, Second Ed.
>
> Any Ideas would be appreciated. TIA,
>
> Jerry Rasmussen
Jerry,
Windows 98 SE has had this problem with some hardware configurations.
Microsoft has a patch to fix this problem, although I guess it has not
worked consistently for all computers. Here is link with information on the
problem submitted by Michele Thuma:
http://members.xoom.com/Khephra/a/shtdwnse.htm
Mary Wolden
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html
|
|
|