Hi Jay,

Before you go too far I would first think about exchanging your RAM for
PC-133 instead, especially if it is new and your vendor is willing.  You
will also want to make sure you flash/or have the latest BIOS version.
Filename: BEHNZ.EXE
Date: 11/17/1999
ID: NZ
goto http://www.abit.com.tw then goto the BE6-II page.

I do not have the BE6-2, I have the BP6 and luv it to pieces...  ABITs are
great, in my opinion.
Otherwise it sounds like a really cool setup.
take care,
David A. Abbe
[log in to unmask]

> Subject: [PCBUILD] 133MHZ Combination?

> I just purchased the following items to build a PC with. They are
> as follows:
> Motherboard: Abit BE-6 II
> CPU ----------: Pentium III 600B/133MHZ FSB
> Ram ----------: 128MB PC100
> I am wanting to set the FSB speed on the motherboard to 133MHZ.
> The vendor tells me all these items will work together and
> operate at 133MHZ.
> Can I get an opinion on this combination?

                         PCBUILD's List Owner's:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>