On Monday, September 11 at 1:10 AM, David Haney wrote:
 > I reciently bought a Abit BX 133 Raid slot 370.
 > Installed a PIII 733MHz 133MHz FC. The CMOS PnP is
 > reporting the CPU as a PIII 366e. ????
 > i turn all the switches off except 9 and 10 and it
 > reports a PIII 366e.
 > I don't get it? >   I used the diag software on your
 > site and it saw it  as a 366e also in dos?
 > can you recomend where to start now?

Hi Dave

It sounds like your bus speed is set at 66 MHz instead
of 133 MHz. Have you checked all the places where this
setting could be made?

Most diagnostic programs and the BIOS will identify
the processor's speed according to what the DIP switches
or Soft BIOS say the processor speed is. Change the
bus speed from 66 to 133 and the processor should go from
366 to 733. (66 X 5.5 = 366 whereas 133 X 5.5 = 733)

Regards,
Bill

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                     http://nospin.com/pc/files.html