On Monday, September 11 at 1:10 AM, David Haney wrote: > I reciently bought a Abit BX 133 Raid slot 370. > Installed a PIII 733MHz 133MHz FC. The CMOS PnP is > reporting the CPU as a PIII 366e. ???? > i turn all the switches off except 9 and 10 and it > reports a PIII 366e. > I don't get it? > I used the diag software on your > site and it saw it as a 366e also in dos? > can you recomend where to start now? Hi Dave It sounds like your bus speed is set at 66 MHz instead of 133 MHz. Have you checked all the places where this setting could be made? Most diagnostic programs and the BIOS will identify the processor's speed according to what the DIP switches or Soft BIOS say the processor speed is. Change the bus speed from 66 to 133 and the processor should go from 366 to 733. (66 X 5.5 = 366 whereas 133 X 5.5 = 733) Regards, Bill PCBUILD maintains hundreds of useful files for download visit our download web page at: http://nospin.com/pc/files.html