I must have missed something, what are we taking apart?
73
Butch
WA0VJR
Node 3148
Wallace, ks.


On Tue, 4 Jun 
2013, Steve Forst wrote:

> There are 4 allen screws on the front panel and 4 on the rear.  You want
> to remove the 4 from the front., then grab the front panel and pull it
> out .  The front panel with knobs attached, and the circuit board will
> come out as one unit.  If you remove the rear screws, all you do is get
> the rear panel off and the board remains  inside the box.
>
> When you get the board out, lay it on a book or something so the
> attached front panel hangs over the edge.     If that doesn't make
> sense, it will when you are holding the  front panel/board assembly in
> your hand.
>
> There will be an allen key included  in the package.
> 73, Steve KW3A
>
> On 6/4/2013 6:38 PM, DAN REID wrote:
>> DXE Engineering  informs me that I need to remove four screws to install =
>> the plug and play chip.  Are these screws in the front or back of the =
>> unit?
>> Thanks,
>> dan (kb6unc)
>>
>>
>>
>
>