Sender: |
|
Date: |
Tue, 4 Jun 2013 16:27:15 -0700 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Message-ID: |
|
In-Reply-To: |
<66.AF.10307.6737EA15@louvi-msg> |
Content-Type: |
TEXT/PLAIN; charset=US-ASCII; format=flowed |
From: |
|
Parts/Attachments: |
|
|
I must have missed something, what are we taking apart?
73
Butch
WA0VJR
Node 3148
Wallace, ks.
On Tue, 4 Jun
2013, Steve Forst wrote:
> There are 4 allen screws on the front panel and 4 on the rear. You want
> to remove the 4 from the front., then grab the front panel and pull it
> out . The front panel with knobs attached, and the circuit board will
> come out as one unit. If you remove the rear screws, all you do is get
> the rear panel off and the board remains inside the box.
>
> When you get the board out, lay it on a book or something so the
> attached front panel hangs over the edge. If that doesn't make
> sense, it will when you are holding the front panel/board assembly in
> your hand.
>
> There will be an allen key included in the package.
> 73, Steve KW3A
>
> On 6/4/2013 6:38 PM, DAN REID wrote:
>> DXE Engineering informs me that I need to remove four screws to install =
>> the plug and play chip. Are these screws in the front or back of the =
>> unit?
>> Thanks,
>> dan (kb6unc)
>>
>>
>>
>
>
|
|
|