mine, when I turn the tuning dial while scanning if it stops on a frequency,
it resumes scanning.
----- Original Message -----
From: "Michael Capelle" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 15, 2005 2:17 PM
Subject: Re: THF6A question


since we are on this thf6 topic, i have a thf6 radio here and one thing I
notice is when scanning through the B band, instead of scanning the
frequencies, whenever the transciever hits a station, it constantly locks
it.  I thought turning the VFO is supposed to resume scanning?  If that is
the case, then the vfo is not doing that and I have to reinitate the scan by
holding function b to resume scanning.  Any suggestions to why this is
happening?
----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 15, 2005 12:59 PM
Subject: Re: THF6A question


> it should transmit everywhere in the B band that it will in the A band.
> ----- Original Message -----
> From: "Walt Sebastian" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 15, 2005 1:48 PM
> Subject: Re: THF6A question
>
>
> Thanks again John,
> I had sat the radio aside and I have forgotten a number of things.  I just
> did a little experimenting.  I see it works as you said in the B band.  If
> it is in the A band, the function followed by the four key turns the
> weather
> channel on and off.  Now that I know that it will be easier.  Also when in
> the B band, it will not transmit on 2 meters.
> Walt
> WA4QXT
> Quaker Hill CT
> [log in to unmask]