mine, when I turn the tuning dial while scanning if it stops on a frequency, it resumes scanning. ----- Original Message ----- From: "Michael Capelle" <[log in to unmask]> To: <[log in to unmask]> Sent: Sunday, May 15, 2005 2:17 PM Subject: Re: THF6A question since we are on this thf6 topic, i have a thf6 radio here and one thing I notice is when scanning through the B band, instead of scanning the frequencies, whenever the transciever hits a station, it constantly locks it. I thought turning the VFO is supposed to resume scanning? If that is the case, then the vfo is not doing that and I have to reinitate the scan by holding function b to resume scanning. Any suggestions to why this is happening? ----- Original Message ----- From: "John Miller" <[log in to unmask]> To: <[log in to unmask]> Sent: Sunday, May 15, 2005 12:59 PM Subject: Re: THF6A question > it should transmit everywhere in the B band that it will in the A band. > ----- Original Message ----- > From: "Walt Sebastian" <[log in to unmask]> > To: <[log in to unmask]> > Sent: Sunday, May 15, 2005 1:48 PM > Subject: Re: THF6A question > > > Thanks again John, > I had sat the radio aside and I have forgotten a number of things. I just > did a little experimenting. I see it works as you said in the B band. If > it is in the A band, the function followed by the four key turns the > weather > channel on and off. Now that I know that it will be easier. Also when in > the B band, it will not transmit on 2 meters. > Walt > WA4QXT > Quaker Hill CT > [log in to unmask]