Check and see if your partition is active on your C: drive, check your BIOS
and see if it is set to boot from A: or C: first, change it to C: and try
booting from a floppy.
Karl Gottshalk
> I have put the motherboard, P-75 processor and original memory into
another
> case. I have a new 1.44 mb floppy drive attached and an old 540 meg HDD.
> When the machine starts, the POST goes fine. The floppy drive is polled
and
> the display shows the appropriate information for this machine. However
the
> machine just never goes any further in the bootup process. I have tried
> resetting the bios to boot from floppy and from the HDD. Neither disk is
> accessed after the original polling of the drives.
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://nospin.com/pc/pcbuild.html