Check and see if your partition is active on your C: drive, check your BIOS
and see if it is set to boot from A: or C: first, change it to C: and try
booting from a floppy.

Karl Gottshalk

> I have put the motherboard, P-75 processor and original memory into
another
> case.  I have a new 1.44 mb floppy drive attached and an old 540 meg HDD.
> When the machine starts, the POST goes fine.  The floppy drive is polled
and
> the display shows the appropriate information for this machine.  However
the
> machine just never goes any further in the bootup process.  I have tried
> resetting the bios to boot from floppy and from the HDD. Neither disk is
> accessed after the original polling of the drives.

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                    http://nospin.com/pc/pcbuild.html