BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG
Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Discovery after upgrading the Ts590:
From:
Steve Forst <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Thu, 5 Feb 2015 07:56:57 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (25 lines) 
Mike,

Although I did the recent update  at the high rate via the USB 
connection, most of the stuff I run is via the serial port at 9600 and 
no problems.

The SWR will read in SSB.   Be sure you are putting some solid audio 
into the mic.   Of course it is just as easy to check SWR in CW or FSK mode.

Toggle the meter button until it says "R" to read SWR.

73, Steve KW3A

On 2/5/2015 7:32 AM, Mike wrote:
> The SWR butten talks only in the CW position.
> The upgrade went fairly easy.  I had to change my baud rate, it didn't
> list 9600 so I changed it, then I changed it back.
> I do have a question, Would it be better if I used a faster baud rate?
> Thanks.
> Mike
> KD2CDU
>
>
>

ATOM RSS1 RSS2