Seems like you would get SWR readings if you push the lower left 
button in the top left group of eight buttons, no matter what 
mode you are in.  Jim WA6EKS

 ----- Original Message -----
From: Steve Forst <[log in to unmask]
To: [log in to unmask]
Date sent: Thu, 5 Feb 2015 07:56:57 -0500
Subject: Re: Discovery after upgrading the Ts590:

Mike,

Although I did the recent update  at the high rate via the USB
connection, most of the stuff I run is via the serial port at 
9600 and
no problems.

The SWR will read in SSB.   Be sure you are putting some solid 
audio
into the mic.   Of course it is just as easy to check SWR in CW 
or FSK mode.

Toggle the meter button until it says "R" to read SWR.

73, Steve KW3A

On 2/5/2015 7:32 AM, Mike wrote:
 The SWR butten talks only in the CW position.
 The upgrade went fairly easy.  I had to change my baud rate, it 
didn't
 list 9600 so I changed it, then I changed it back.
 I do have a question, Would it be better if I used a faster baud 
rate?
 Thanks.
 Mike
 KD2CDU