BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
howard kaufman <[log in to unmask]>
Reply To:
Date:
Wed, 4 Mar 2015 17:55:50 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (67 lines)
In window-eyes, go to 
Go to devices, synthesizers, and set the sound card to the one you are
currently using.

-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Steve Forst
Sent: Wednesday, March 04, 2015 8:07 AM
To: [log in to unmask]
Subject: Re: Why do I do this?

While you can do this in Windows sound devices, it might be better to do 
it from within your screen reader.   Don't know about WE, but in JAWS:
Open  the JAWS window, and in the drop down menus go to utilities/sound
cards.  you will see "default" most likely selected.  Change this to
whatever your on board sound card is, and JAWS will always use it.

While you can change in Windows sound devices what sound card Windows 
uses as default.  This can  change down the road.    It may work fine 
for years, but after some crash, or Windows update, or some reason known
only to Microsoft,  Windows may  change  things around.

If you get in a jam with this, kill DC power to the radio to make the 
Kenwood USB sound device go away.   Turning off the radio doesn't help 
since as long as DC power is  applied to the radio, it is  still "on" 
just asleep.


73, Steve KW3A

On 3/4/2015 8:45 AM, howard kaufman wrote:
> Thanks Butch.
> I was thinking about control pannel, I hope I can tell windows to only 
> use the realtech sound card.
> Now when I loose sound I loose the ability to access control pannel to 
> tell it anything.
>
>
> -----Original Message-----
> From: For blind ham radio operators 
> [mailto:[log in to unmask]]
> On Behalf Of Butch Bussen
> Sent: Wednesday, March 04, 2015 5:58 AM
> To: [log in to unmask]
> Subject: Re: Why do I do this?
>
> You need to tell the computer which to use as the default sound card.  
> It has been a while, but as I recall, I went to control pannel and 
> then to sounds and audio devices.  There are some control tabs, I set 
> audio and voice to the internal sound card, my computer uses realtech and
usb device.
>
> As far as seeing your router, you can get high gain antennas if your 
> router has removable antennas.  You can get a range extender or a 
> repeater, or you can get a usb wireless device with a much better antenna.
> I can do some searching, there is one I have I bought a cdouple yoears 
> ago, not even sure where, but it is very sensative.  I'll look for that
link.
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
>
>
>

ATOM RSS1 RSS2