Well Butch, you have the Royals, and the cubs are looking up.
The only question about the cubs, is
How will they break your heart this year.
I still haven't recovered from 1969.
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Howard, W A 9 Y B W
Sent: Wednesday, March 04, 2015 11:55 AM
To: [log in to unmask]
Subject: Re: Why do I do this?
Butch,
At least you have a team to fall back on.
Howard #3
----- Original Message -----
From: "Butch Bussen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, March 04, 2015 9:25 AM
Subject: Re: Why do I do this?
>I can't help it, I'm a cubs fan, a rockies fan, and a royals fan. What
> can I say???
> 73
> Butch
> WA0VJR
> Node 3148
> Wallace, ks.
>
>
> On Wed, 4 Mar 2015, Pat Byrne wrote:
>
>> Who'd want to listen to the Cubs on anything!!
>> Pat, K9JAUAt 08:19 AM 3/4/2015, you wrote:
>>> yep, you are right, I wasn't on that machine when I wrote previous
>>> reply, I use a speakout on the other machine. On this one, with the
>>> 590, I do use software speech. Anyhow, under devices and synthesizers,
>>> you'll see the one you are using. If you tab over you'll see where you
>>> can specify the sound card. I recall now why I specified the realtech
>>> in control pannel, I use record mp3 direct cut to record baseball on
>>> this machine and I want it to use internal card instead of the radio.
>>> Anyone want to listen to the cubs on 20 meters? hi hi.
>>> 73
>>> Butch
>>> WA0VJR
>>> Node 3148
>>> Wallace, ks.
>>>
>>>
>>> On Wed, 4 Mar
>>> 2015, Steve Forst wrote:
>>>
>>>> While you can do this in Windows sound devices, it might be better to
>>>> do
>>>> it from within your screen reader. Don't know about WE, but in JAWS:
>>>> Open the JAWS window, and in the drop down menus go to utilities/sound
>>>> cards. you will see "default" most likely selected. Change this to
>>>> whatever your on board sound card is, and JAWS will always use it.
>>>>
>>>> While you can change in Windows sound devices what sound card Windows
>>>> uses as default. This can change down the road. It may work fine
>>>> for years, but after some crash, or Windows update, or some reason
>>>> known
>>>> only to Microsoft, Windows may change things around.
>>>>
>>>> If you get in a jam with this, kill DC power to the radio to make the
>>>> Kenwood USB sound device go away. Turning off the radio doesn't help
>>>> since as long as DC power is applied to the radio, it is still "on"
>>>> just asleep.
>>>>
>>>>
>>>> 73, Steve KW3A
>>>>
>>>> On 3/4/2015 8:45 AM, howard kaufman wrote:
>>>>> Thanks Butch.
>>>>> I was thinking about control pannel, I hope I can tell windows to only
>>>>> use
>>>>> the realtech sound card.
>>>>> Now when I loose sound I loose the ability to access control
>>> pannel to tell
>>>>> it anything.
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: For blind ham radio operators
>>>>> [mailto:[log in to unmask]]
>>>>> On Behalf Of Butch Bussen
>>>>> Sent: Wednesday, March 04, 2015 5:58 AM
>>>>> To: [log in to unmask]
>>>>> Subject: Re: Why do I do this?
>>>>>
>>>>> You need to tell the computer which to use as the default sound card.
>>>>> It
>>>>> has been a while, but as I recall, I went to control pannel and then
>>>>> to
>>>>> sounds and audio devices. There are some control tabs, I set audio
>>>>> and
>>>>> voice to the internal sound card, my computer uses realtech and
>>> usb device.
>>>>>
>>>>> As far as seeing your router, you can get high gain antennas if
>>> your router
>>>>> has removable antennas. You can get a range extender or a
>>> repeater, or you
>>>>> can get a usb wireless device with a much better antenna.
>>>>> I can do some searching, there is one I have I bought a cdouple
>>> yoears ago,
>>>>> not even sure where, but it is very sensative. I'll look for that
>>>>> link.
>>>>> 73
>>>>> Butch
>>>>> WA0VJR
>>>>> Node 3148
>>>>> Wallace, ks.
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>
>>
---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com
|
