hi.
The manual I use was written for the UV5R, but all the concepts apply to the UV82.
I am going to try to attach it here.
> Ashley (KC1CPS)
> On Nov 21, 2014, at 5:01 PM, Jim Gammon <[log in to unmask]> wrote:
>
> Hi I am looking for a manual for the Baofeng UV82X a two meter, 220 MHZ HT.
> Any leads where to get one would be much appreciated. Have already checked
> out I can Work This Thing and Handiham.org and couldn't find a manual for
> this particular radio. 73, Jim WA6EKS
>
>
> -----Original Message-----
> From: Steve Forst
> Sent: Sunday, November 16, 2014 4:44 AM
> To: [log in to unmask]
> Subject: Re: Setting carrier level on the 590?
>
> I have mine set like this:
>
> menu79 =201
>
> This is for pf key A which is to the left of the power button. Set
> this way it will give S meter in receive and power output in transmit.
>
> menu 80 = 202
>
> This is for pf key B which is the right key of the 2 keys above the
> keypad. This will do nothing in receive, but will give swr, alc, or
> compression levels
> while in transmit. Which one is spoken is set by hitting the
> drv/meter key just to the left of this pf B key. It willtoggle between
> the various meter
> functions. Don't give it a long press, or you will enable the drive
> function.
>
> If you set up this way, you would need to hit enter twice to get the
> frequency readout. And TX monitor must be turned off, or no speech in
> any of the above.
>
>
> 73, Steve KW3A
>
>
>
>
>
> On 11/16/2014 12:07 AM, Jim Gammon wrote:
>> Jim, I still haven't figured out how to get the ALC reading. I think
>> there
>> are some higher numbered menus like around 80 that control that. Am
>> getting
>> S meter readings but not sure where the RF gain, Pre-amp, ant attenuator
>> settings should be to get accurate readings. Jim WA6EKS
>>
>>
|