Ah. Ok thanks.

On 8/18/12, Buddy Brannan <[log in to unmask]> wrote:
> First, you're using the wrong menu. It's menu 16, not menu 18, to =
> program a transit CTCSS code.=20
>
> Second, the site may not list the CCSS tones. You'd better ask some =
> locals about those. Also, be sure you have the correct offset (menu 24) =
> and offset amount (menu 23).=20
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: (814) 860-3194 or 888-75-BUDDY
>
>
>
> On Aug 18, 2012, at 8:26 AM, Daniel C <[log in to unmask]> wrote:
>
>> I'm not so worried about the repeaters as much as the programming.
>> I just want to be sure I am programming in the repeaters correctly =
> manually.
>> I have repeaters for 2 meeters on this site I found
>> http://qsl.fm/repeaters.php?region=3DFL&rfb=3D2m&search=3DSearch+by+Stat=
> e
>> As an example from the site above. If I am to program in a repeater
>> with just an input tone of 94.8 I'd do:
>> 1. Put in the frequency of 145.1700
>> 2. Select menu 18, and set 94.8.
>> How would I know what would CTCSS look like in a repeater listing?
>> using the above website?
>> Unless I'm reading the above site listing wrong, I don't see any CTCSS
>> for any repeaters on that site.
>>=20
>> On 8/18/12, Buddy Brannan <[log in to unmask]> wrote:
>>> Hi,
>>>=20
>>> Better than what, and where?=3D20
>>>=20
>>> There might be a commercial software from Powerwerx that is =
> accessible, =3D
>>> I don't know, but the one that Wouxun ships is pretty difficult. What =
> =3D
>>> trouble are you having with programming manually?
>>> --
>>> Buddy Brannan, KB5ELV - Erie, PA
>>> Phone: (814) 860-3194 or 888-75-BUDDY
>>>=20
>>>=20
>>>=20
>>> On Aug 17, 2012, at 10:17 PM, Daniel C <[log in to unmask]> wrote:
>>>=20
>>>> Does anyone know of any better 2 meeter repeaters that those with 2
>>>> meeter radios can use?
>>>> And also,, would there be any accessible software that can be used =
> to
>>>> program a Wouxun KG-UVD1P currectly?
>>>> I tried to program manually, but it's abit difficult to do.
>>>=20
>