First, you're using the wrong menu. It's menu 16, not menu 18, to program a transit CTCSS code. 

Second, the site may not list the CCSS tones. You'd better ask some locals about those. Also, be sure you have the correct offset (menu 24) and offset amount (menu 23). 
--
Buddy Brannan, KB5ELV - Erie, PA
Phone: (814) 860-3194 or 888-75-BUDDY



On Aug 18, 2012, at 8:26 AM, Daniel C <[log in to unmask]> wrote:

> I'm not so worried about the repeaters as much as the programming.
> I just want to be sure I am programming in the repeaters correctly manually.
> I have repeaters for 2 meeters on this site I found
> http://qsl.fm/repeaters.php?region=FL&rfb=2m&search=Search+by+State
> As an example from the site above. If I am to program in a repeater
> with just an input tone of 94.8 I'd do:
> 1. Put in the frequency of 145.1700
> 2. Select menu 18, and set 94.8.
> How would I know what would CTCSS look like in a repeater listing?
> using the above website?
> Unless I'm reading the above site listing wrong, I don't see any CTCSS
> for any repeaters on that site.
> 
> On 8/18/12, Buddy Brannan <[log in to unmask]> wrote:
>> Hi,
>> 
>> Better than what, and where?=20
>> 
>> There might be a commercial software from Powerwerx that is accessible, =
>> I don't know, but the one that Wouxun ships is pretty difficult. What =
>> trouble are you having with programming manually?
>> --
>> Buddy Brannan, KB5ELV - Erie, PA
>> Phone: (814) 860-3194 or 888-75-BUDDY
>> 
>> 
>> 
>> On Aug 17, 2012, at 10:17 PM, Daniel C <[log in to unmask]> wrote:
>> 
>>> Does anyone know of any better 2 meeter repeaters that those with 2
>>> meeter radios can use?
>>> And also,, would there be any accessible software that can be used to
>>> program a Wouxun KG-UVD1P currectly?
>>> I tried to program manually, but it's abit difficult to do.
>>