Tnx Kevin and Bob. From what you guys say, I should have no problems
with this. Maybe I'll give it a try next week.
73, Steve KW3A
On 7/3/2011 5:02 PM, Kevin Nathan wrote:
> Hi Steve,
>
> Yes, I use JAWS and as you will have seen by the other posts, just before
> you tell it to update a screen pops up which JAWS will read with no problem
> outlining the firmware version currently installed and the new version you
> will update to.
>
> Good luck and very 73.
>
>
>
> Kevin :)
> Amateur Radio: K7RX
>
>
> -----Original Message-----
> From: For blind ham radio operators [mailto:[log in to unmask]]
> On Behalf Of Steve Forst
> Sent: Sunday, July 03, 2011 11:11
> To: [log in to unmask]
> Subject: Re: TS590 Firmware Update: Has Anyone Tried It?
>
> Kevin,
>
> Just curious: Did you use JAWS to do the firmware update? Also, is
> there a way to determine current firmware version without sighted help
> (either from the radio or via software)?
>
> I'm on my own here and sighted help isn't a practicle option. I'd
> like to find my current firmware, but don't want to get hosed in the
> process.
>
> 73, Steve KW3A
>
> On 7/3/2011 12:15 PM, Kevin Nathan wrote:
>> Hi Tom and All,
>>
>> I am proud to tell you that I did the last upgrade from 1.03 to 1.04 on my
>> own with no sighted assistance. I'll go look at the 1.05 upgrade and
> check
>> it out this weekend.
>>
>> I did notice something cool on the last upgrade. Before, when you did the
>> complete reset after the upgrade, you lost all memories and settings and
> had
>> to reload them from ARCP-590. This time, I didn't seem to lose my
> settings
>> which was really cool. I'll see what happens when I go to 1.05 if I do.
>>
>> Take care all and very 73.
>>
>>
>>
>> Kevin :)
>> Amateur Radio: K7RX
>>
>>
>> -----Original Message-----
>> From: For blind ham radio operators [mailto:[log in to unmask]]
>> On Behalf Of tom behler
>> Sent: Sunday, July 03, 2011 05:52
>> To: [log in to unmask]
>> Subject: TS590 Firmware Update: Has Anyone Tried It?
>>
>> Hi, all.
>>
>> You may recall that, last week, I posted a link to what apparently is a
> new
>> Firmware upgrade for the TS590. It is version 1.05.
>>
>> http://www.kenwood.com/i/products/info/amateur/software_download.html
>>
>>
>>
>> Does anyone know what you gain from the upgrade, and if it's worth
> pursuing?
>>
>> Currently I, and I assume many others on the list, have version 1.04.
>>
>> If you ask on the TS590 list, you get a response suggesting that: "you
> have
>>
>> to be crazy not to update, since it's just like getting a brand new radio
>> out of the box."
>>
>> While I suppose this is true, I personally am not one who always goes for
>> the latest upgrades, just because they are out there.
>>
>> Any thoughts would be appreciated.
>>
>> 73 from Tom Behler: KB8TYJ
>>
>
|
