Tnx Steve.  Got it all set up the way I want now.

BTW, as for the multi channel knob, mine is going flaky after 8 years. 
Kind of jumps around as you try an  turn it to  set any of the functions it 
is used for.   I've heard of others having this problem as the encoder gets 
dirty.    If it ever needs to go out for service, I'll probably get it 
replaced.   Trying to blow it with air or using a vacuumed hose on it only 
gives  slight and temporary relief.

73, Steve KW3A
----- Original Message ----- 
From: "Steve" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, October 22, 2009 11:52 AM
Subject: Re: TS-2000 question


> Hmmm, I think the number 9 key is the fine step key?  If you press 9 by
> itself, you can turn the multi-channel knob to set the finer steps.  If 
> you
> press the func key first then 9, you set the step size used by the
> multi-channel knob.
>
> So, I think what you want to do is press 9, rotate the multi-channel knob 
> to
> the left, and press 9 again to save the change.
>
> Steve, K8SP
> Lansing, MI
> ----- Original Message ----- 
> From: "steve" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, October 22, 2009 10:57 AM
> Subject: TS-2000 question
>
>
>    Here's one for you TS-2000 users:
>
> I've been set up so that one turn of the main tuning knob will give 1 khz
> frequency change.  Somehow I've lost that and can't remember what I did or
> how to get it back.  Menu 2  has settings for 1000 or 500, which will give
> either 10 khz or 5 khz per turn of the knob.    What's the secret trick to
> get back 1 khz per turn?
>
> 73, Steve KW3A
>