BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Colin McDonald <[log in to unmask]>
Reply To:
For blind ham radio operators <[log in to unmask]>
Date:
Sun, 14 Sep 2008 21:12:48 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (99 lines)
just make sure your radio tx filter doesn't exceed 2.6HZ.
I think most kenwoods had 2.4 KHZ as their stock SSB filter bandwidth right?
Those that don't or that are wider either have after market filters, or
utilize DSP filters which can be changed via the menus anyway.
73
Colin, V A6BKX
----- Original Message ----- 
From: "Mark" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, September 14, 2008 9:00 PM
Subject: Re: More about 60 Meter Activity


>
> Hi John,
>      The other part is how does one get the signal to meet the 2.6 KHZ
> modulation requirement?
>
> God bless,
> Mark
> -- Currently in Pendleton, Eastern Oregon Regional At Pendleton, Oregon
> Clear,
> ----- Original Message ----- 
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, September 14, 2008 7:51 PM
> Subject: Re: More about 60 Meter Activity
>
>
> >I did 1 of mine but I can't remember now, I think there's a diode on the
> > front board, the one behind the front panel, but it's been so long I
don't
> > remember. That was 1 of those I had someone show me where it was and I
did
> > the mod. Same deal with my TS-940 when I had that, I did that one
myself.
> > ----- Original Message ----- 
> > From: "Mark" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Sunday, September 14, 2008 10:18 PM
> > Subject: Re: More about 60 Meter Activity
> >
> >
> >> Does any one know how to modify the Kenwood ts440s for 60 meters?
> >>
> >> God bless,
> >> Mark
> >> -- Currently in Pendleton, Eastern Oregon Regional At Pendleton, Oregon
> >> Clear, 7
> >> ----- Original Message ----- 
> >> From: "Mike Duke, K5XU" <[log in to unmask]>
> >> To: <[log in to unmask]>
> >> Sent: Sunday, September 14, 2008 6:23 PM
> >> Subject: More about 60 Meter Activity
> >>
> >>
> >>>I too hear more 4 stations than anything else, even from here in
> >>> Mississippi.
> >>>
> >>> There are several stations in the Huntsville, Alabama area, most of
whom
> >>> run
> >>> mobile, and they all have very good signals.
> >>>
> >>> Most of the activity is on 5371.5, which is commonly known as "channel
> >>> 4,"
> >>> like it or not. Tonight, I heard a K1 there talking to a station in
> >>> England.
> >>> The 1 was very clear here, while the G station was readable, but down
in
> >>> my
> >>> noise.
> >>>
> >>> I too have not opened up my TS570, and I'm not sure I will. I do like
to
> >>> listen on 60, though, because most of the operators behave themselves,
> >>> and
> >>> there is usually no qrm.
> >>>
> >>> Like so many of our other privileges, this band is also under
utilized.
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Mike Duke, K5XU
> >>> American Council of Blind Radio Amateurs
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 270.6.21/1671 - Release Date: 9/14/2008
7:16 AM
>
>

ATOM RSS1 RSS2