Hi Rich.

Is this one software programmable like most of the other Icom handhelds?  I 
use the T7H and found that software is really the way to go.

By the way, I went with the T7H because it still uses a BNC connector for 
the antenna.  Are those of you that are using the IC-T90A or the Kenwood 
THF6A (the other radio I considered) finding the SMA connectors to be a 
problem?

73, de Lou K2LKK



At 10:01 PM 7/25/2006 -0400, you wrote:
>Hi;
>I knew but the problem with programming is that once you get it relatively
>done you don't think about it for six months or so.  Now if we were having
>this chat a year ago I could have told you exactly how to do it.  The quick
>start guide on Icanworkthisthing gives you a pretty good idea how to do it.
>I essentially followed that guide and was able to store frequencies and the
>needed pl tones into memory.  The first few frequencies are used for band
>edges for a band scan so you might not want to start with the first memory.
>Take a look at the quick start guide.  They get a bit in to itcss tones and
>I won't be needing them here.  The only hard part is that you have to do
>lots of counting but other than that all the info is there.
>Rich
>
>----- Original Message -----
>From: "Howard Kaufman" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Tuesday, July 25, 2006 6:58 PM
>Subject: Re: ic-t90
>
>
>Richard, is the software and cable worth it for the at-90?
>I asked last week how to program this thing and nobody answered my
>question.  Given the natural helpfulness of the hams on this list; I
>have to assume that is because nobody knows.
>
>
>--
>No virus found in this outgoing message.
>Checked by AVG Anti-Virus.
>Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

Louis Kim Kline
A.R.S. K2LKK
Home e-mail:  [log in to unmask]
Work e-mail:  [log in to unmask]
Work Telephone:  (585) 697-5753