you don't have to reprogram anything, just enable the mic control in the
menu and the A key is enter, the 6 and keys are for freq read out, 2 turns
PL and CTCSS on and off, 5 opens the squelch and you can do a lot more that
way too.
----- Original Message -----
From: "Steve Dresser" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, November 23, 2004 11:32 AM
Subject: Re: New Radio


> Butch,
>
> On the TM-G707A, you can select both VFO frequencies and memory channels
> with the keypad on the microphone.  You'll have to program one of the PF
> keys to be the Enter key.  You may also want one of them to be the speech
> button.
>
> Steve
>
> On Tuesday 11/23/04 11:03 Butch Bussen wrote:
>
>>Speaking of Kenwood radios, I haven't looked at these in a long time.
>>What control if any do you have with the mike on the two models we've been
>>discussing?  Memory or freq select?
>>73s
>>Butch Bussen
>>wa0vjr
>