Hi everyone, I have been working on a system that will not read from the floppy drive. When I try to access the drive, I get an unfamiliar reading noise followed by a "not ready reading drive A" prompt. I swapped the drive with a new one and when I try to access it, I have the system freeze up! I even tried a new ribbon cable with each floppy drive(both old drive and new). System seems to be very slow when I double click on icons with the new replacement drive. The system has a 6.4GB Hard drive as primary master, CD-ROM is secondary master, and the floppy cable serves a Seagate backup drive (middle connector) and the floppy drive is connected off the end of the cable. When I try to remove drives or controllers through Device Manager, so that windows can rebuild at restart, again, things freeze up. Maybe the system resources are taxed to the limit? All responses greatly acknowledged! Thanks everyone. Jim. ______________________________________________________ Get Your Private, Free Email at http://www.hotmail.com Visit our website regularly for FAQs, articles, how-to's, tech tips and much more http://nospin.com - http://nospin.org