I have the following four drives that I want to connect. I'm checking with you to make sure that I'll do it correctly. CD-ReWritable CD-ROM Floppy Hard Disk Drive I have three connectors on the board. From left to right, next to the power wires that are plugged into the MB. My questions is: which drives should be Master/Slave. Is a Master/Slave setup done by using one ribbon cable? (I have three ribbon cables available) Thanks in advance for your help. Erik Hundrieser Visit our website regularly for FAQs, articles, how-to's, tech tips and much more http://nospin.com - http://nospin.org