Greetings, Back in the 80's I first scrutinized a desktop system (for home use) closely and concluded as follows: 1.) It is a collection of Dee-Vices. 2.) Some Dee-Vices are separately switched (i.e. monitor, system unit). 3.) When using the system, it would serve my purposes well if _all_ Dee-Vices were simultaneously powered or not powered. So I plugged The relevant Dee-Vices into a power strip, set the strip on the floor, and proceeded to power the entire system on/off with my Big Toe. Have continued to do so for years and years. More recently I built a Slot 1/ATX system around an Enlight 723x case and an Abit BH6 mainboard. Runs NT WS 4.0 (a non-PnP OS). The cover of the BH6 manual sez "SOFT SWITCH" in huge letters, as if to forewarn me that my Big Toe was about to be retired. Of course, an explanation of how the soft-switch works appears to be missing from the manual. When I shutdown the OS, the system does _not_ automatically power down. Sure enough, when I switch the power strip on, it has no effect on the system unit. I gotta bend over, manually push the switch. "SOFT SWITCH" may be a God-Send for corporate admin's. It's a pain in the arse for po' me. I miss my hi-tech Big Toe actuation system. Is there any way of disabling soft-switch? Getting the system to power up the "old way"? I'm afraid I find the whole thang about software controlling functions originally designed for human intervention to be pretty scary. Zalut, David ********************************************************************** ** David Nasser ** [log in to unmask] ** ** Univ. Mo. St. Louis ** ** **********************************************************************; "... my home's on the water, and I don't need no land." - from "Po' Boy, Long Ways From Home" The PCBUILD web site always needs good submissions. If you would like to contribute to the website, send any hardware tech tips or hardware reviews to: [log in to unmask]