>
> I have not yet changed frequency jumper settings which were
> already factory set to 5.5x (1 1/2) for the core bus, 66.8Mhz
> for the external clock bus and 33.8Mhz for the PCI.

The default setting should be 4.5X @ 66 Mhz  4.5*66=300.

> When booting up, the screen reports the CPU as Celeron (450Mhz).
> This suggests that the default settings are the correct ones
> for overclocking the 300A to 450Mhz.  Is this right or is
> 66.8Mhz the wrong external clock setting for overclocking?

To overclock this chip to 450 MHZ, you should run at 4.5X @ 100 MHZ. I
suspect the mobo is just reporting the speed based upon it's settings, not
upon what the chip is actually running.  The Celeron is clock-locked,
meaning it won't run at any multiplier other than 4.5X. (Overclock is always
at your own risk)

>
> Also, what would the right PCI bus setting be?  As I don't
> yet have any PCI bus peripherals, this may be of purely
> academic interest at this point.

The PCI bus should be at 33 Mhz - Either 1/2 of a 66 MHZ bus, or 1/3 of a
100 MHZ bus.

Dan Shaughnessy

         The PCBUILD web site always needs good submissions.  If
          you would like to contribute to the website, send any
               hardware tech tips or hardware reviews to:
                           [log in to unmask]