Roberto Safora Romay wrote: > Does any body know an easy home methode for dealing with magnetised-monitor > ? Roberto, Check the monitor's control panel and look for a button labeled DEGAUSS. If you have one, turn on the monitor, wait 2-3 minutes and then push the button. If you do not have the button, then you can purchase a DEGAUSSing coil from a television repair shop. It should come with instructions for it's use, but it is simple enough to work. Turn on the monitor, wait 2-3 minutes then place the DEGAUSSing coil flat on the center of the glass screen Turn on the electric for the coil and slowly pull the coil away from the monitor screen in a straight line. Try to keep the coil parallel to the screen face at all times. When you have a 3-4 foot distance between the coil and the screen, then you can turn it off. -- Jim Meagher ===== Micro Solutions Consulting Member of The HTML Writers Guild http://www.ezy.net/~microsol International Webmasters Association 410-543-8996 MS Site Builder Network - Level 2 member ===== The PCBUILD web site always needs good submissions. If you would like to contribute to the website, send any hardware tech tips or hardware reviews to: [log in to unmask]