sorry about that removing the NIC did not resolve the problem. As for the settings, I have been unable to set the card up because the computer won't boot up Andy -----Original Message----- From: Earl Truss <[log in to unmask]> To: [log in to unmask] <[log in to unmask]> Date: Monday, December 07, 1998 5:34 PM Subject: Re: [PCBUILD] Floppy Drive Problem >You've not mentioned if removing the NIC fixes the problem. It would be >helpful to know this. >Also, what settings have you used for the NIC? >---------- >> From: Andre Cotnoir <[log in to unmask]> >> To: [log in to unmask] >> Subject: [PCBUILD] Floppy Drive Problem >> Date: Sunday, December 06, 1998 5:04 PM >> >> I have an old 486 DX2 66 that I wanted to connect in a peer to peer >> home network. It has 2 floppy drives (A-3 1/2 1.44 Meg and B-5 1/4 1.2 >> Meg). After I installed an ISA D-Link NIC, the computer booted up and >went >> through the POST, checked drive A and stalled on drive B. The light on >the > > PCBUILD maintains many useful files for download > on our web site - visit our download page at: > http://nospin.com/pc/files.html > PCBUILD maintains many useful files for download on our web site - visit our download page at: http://nospin.com/pc/files.html