Monday, December 07, 1998 4:15 PM Andre Cotnoir wrote: >I then disconnected the B drive but now >the computer hangs on the A drive with the light remaining on and the >computer just hanging there. When I reconnected the B drive, the POST went >through the A drive without any problem and hung on the B drive again. Andre, this may sound trivial, and I probably won't be the only one to ask you, but are you sure the ribbon isn't reversed. When the light stays on at boot-up, this is often the case. This also means any disk that is read in this drive will be erased, so be careful not to use any non-replaceable disks. Rick Swartz ([log in to unmask]) http://www.uuhome.de/richard.swartz PC-Support Emission-Monitoring (Air) BASF PCBUILD maintains many useful files for download on our web site - visit our download page at: http://nospin.com/pc/files.html