Hello,

As Jim suggested, a "position-sensitive" computer means something is
loose. More often than not the graphic card will have slipped out enough
that all fingers are not making contact. Many mainboards will act
completely dead if the graphic card is not properly installed.

There are at least two alternatives:

Loose screws/washers/other small parts that fall onto a component and
short it...just turn upside down and shake to find out.

A mounting post that shorts the mainboard that is too lose in the case.
It is best to check this by visual inspection. Pressing and pushing can
damage the board and/or cause a worse short circuit.

Good luck and keep us posted.

Bruce

--
------------------------------------------------------------------
        Bruce Boschek - Haus Christiansruh - Nidda, Germany
       Using IBM OS/2 Warp Connect and MR/2ice (Registered)
   "Scitum est inter caecos luscum regnare posse."
(It is well known, that among the blind the one-eyed man is king.)
                          - Gerard Didier Erasmus (c. 1465-1536)
------------------------------------------------------------------

                                  -----
       **Need help with PCBUILD mailing list? Send an Email to:**
        Bob Wright<[log in to unmask]> or Drew Dunn<[log in to unmask]>