Mike,

If you can't find the pigtail you want, maybe just buy the cheapest 3 
foot coax jumper with pl-259's on each end and cut it  in half.  Use the 
other end for another project.

I don't know what is available in  your area, but for less than fifteen 
bucks,  I would buy a  "dipole center insulator".   This has a so-239 to 
accept your coax and provisions to attach the antenna wires without 
pulling everything apart when it is put up in the air.

While you can use a pigtail, you will have to engineer wire attachment 
and strain relief.


I don't think I would  use  the  4:1 balun unless you were going to feed 
with open wire line, or  use it at the feed point and make it a Windom 
type off center fed antenna.

73, Steve KW3A

On 5/15/2013 8:40 AM, Michael Ryan wrote:
> Hi all:=20
>
> I wanna build a quick deploy antenna for FD and I need to buy the coax conne=
> ctor with the 2 wires coming off it to solder to the 14AWG wire I'm gonna us=
> e.=20
> I'm gonna make some insulators and I need this pig tail but I don't know a p=
> roduct manufacturer to look for. I guess I could use the 4/1 balun I have in=
>   my junk box because I don't wanna pay 77 bucks for a ready made product fro=
> m radio world in Toronto.=20
>
> 73:=20
> Michael DE VO1AX=20
>
> Sent from my iPhone=
>
>
>