What is the usb audio controller? I don't remember if I installed that one or not. 73 Butch WA0VJR Node 3148 Wallace, ks. On Sat, 5 Jan 2013, Steve Forst wrote: > Hi Albert, > > Different Steve here. Glad it is working for you. > > Here is the page for Kenwood software downloads: > > http://www.kenwood.com/i/products/info/amateur/software_download.html > > Look down the page for the 590 stuff. The control program is the ARCP > 590 software, if you intend to use the USB port on the back of the rig, > you also have to install the "virtual comm port driver" which is also > found here. There is another one called " USB audio controller, which > you don't have to worry about. > > If you have a serial port on the pc, you can use the serial port on the > 590 to run ARCP 590 or other third party software, but if you are doing > the USB connection, you have to use the virtual comm driver. > > On another note, here is a great resource page for the 590: > > > http://homepage.ntlworld.com/wadei/ts-590s.htm > > > 73, Steve KW3A > On 1/5/2013 11:55 AM, Albert Sanchez wrote: >> Hi Steve >> Always good to hear from ya! I got the files from I can work this thing so I >> think I'm ok! Had my first qso on 40 late last night (or maybe I should have >> said early this morning) with a guy in GA. Good solid S9 sigs each way! I >> found a USB cable in my junk drawer so now I need to find the software to >> control the rig from my laptop, any idea where to look? >> Can you get on 40 meters? Maybe we can set up a schedule for sometime this >> weekend? >> Best 73's, >> Albert WA7FXB >> ----- Original Message ----- >> From: "Steve" <[log in to unmask]> >> To: <[log in to unmask]> >> Sent: Saturday, January 05, 2013 10:54 AM >> Subject: Re: It's Here! >> >> >>> Al, >>> >>> I don't remember what is on ICanWorkThisThing.com but if you need a menu >>> listing or key reference, let me know. I have it as a .bns file so I can >>> snag it and send it to you as an attachment off-list. >>> >>> Steve, K8SP >>> ----- Original Message ----- >>> From: "Tom Behler" <[log in to unmask]> >>> To: <[log in to unmask]> >>> Sent: Friday, January 04, 2013 8:41 PM >>> Subject: Re: It's Here! >>> >>> >>>> Well, have at it, and enjoy your week-end! >>>> >>>> You may not get much sleep, but that's ok. >>>> >>>> It's all in the spirit of ham radio fun. >>>> >>>> Tom Behler: KB8TYJ >>>> >>>> ----- Original Message ----- >>>> From: "Albert Sanchez" <[log in to unmask]> >>>> To: <[log in to unmask]> >>>> Sent: Friday, January 04, 2013 7:08 PM >>>> Subject: Re: It's Here! >>>> >>>> >>>>> Hi Tom! >>>>> My friend Larry, w4rhy, came by this afternoon on his way home from work >>>>> and >>>>> showed me how to hook up the rig to a new power supply (I was not sure >>>>> which >>>>> cable was gnd etc. Now the fun begins! >>>>> A.S. WA7FXB >>>>> ----- Original Message ----- >>>>> From: "Tom Behler" <[log in to unmask]> >>>>> To: <[log in to unmask]> >>>>> Sent: Friday, January 04, 2013 6:37 PM >>>>> Subject: Re: It's Here! >>>>> >>>>> >>>>>> Albert: >>>>>> >>>>>> Trust me, you're gonna love it! >>>>>> >>>>>> Tom Behler: KB8TYJ >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Albert Sanchez" <[log in to unmask]> >>>>>> To: <[log in to unmask]> >>>>>> Sent: Friday, January 04, 2013 10:02 AM >>>>>> Subject: It's Here! >>>>>> >>>>>> >>>>>>> Hi All >>>>>>> I'm pleased to let you all know that the TS-590 arrived last night = >>>>>>> around 8:30PM. Haven't taken it out of the box yet A.S., wa7fxb >>>>>>> >>>>> >> >> >> > >