Hi; The thing that surprised me was that there was a gap titan for sale on the arrl site and when talking with the owner I was advised that his was mounted two feet above ground. If I have the bottom of this antenna pictured correctly it would seem that the horizontal sections would get in the path with it that close to the ground. I'm still looking for a qualified installer or two and I've learned that looking at an antenna in the box can be very annoying. Both the gap and butternut seem interesting although their approaches are very different. Richard ----- Original Message ----- From: "Lou Kline" <[log in to unmask]> To: <[log in to unmask]> Sent: Wednesday, June 27, 2007 9:22 PM Subject: Re: gap titon Hi. It isn't really a counterpoise in the classic sense but rather a capacity hat (except it is on the bottom). I have mine mounted on a ten foot section of heavy walled masting, which is fastened to the tilt over base that GAP sells. That base works extremely well, provided that you dig a good hole and mount it in about four of the 80 lb. bags of concrete. Mine has been severly tested--it went through all three rounds of severe thunderstorms that we had last week and stayed up, which makes it decidedly more rugged than some of the trees around here! I think the GAP can be a very reliable antenna if you mount it properly, but it pays to over engineer it and try to make it as bomb proof as possible. 73, de Lou K2LKK At 11:03 AM 6/27/2007 -0500, you wrote: >Hi; >I believe Lou and others on this list are using this antenna. I ran into >someone using the antenna mounted six inches above ground. Am I correct >that there is a counterpoise at the base? Wonder how one avoids lawn mower >issues with the counterpoise essentially at the ground. >A picture is indeed a thousand words. >Richard > > > >-- >No virus found in this incoming message. >Checked by AVG Free Edition. >Version: 7.5.476 / Virus Database: 269.9.10/875 - Release Date: 6/27/2007 >9:08 PM Louis Kim Kline A.R.S. K2LKK Home e-mail: [log in to unmask] Work e-mail: [log in to unmask] Work Telephone: (585) 697-5753