I have the 3330 MFD and also had problems with auto feeder. HP replace it once but the second time, a couple of months later, they told me it was out of warranty and would cost more to fix than unit was work. My new Canon seems ok. -- David -------------- Original message -------------- > Re: HP 4215 "All-In-One" Print, etc device > > Greetings, > > I have had the above named print, etc device for > 10+ months. It has sucessfully processed about > 30 pages since it was purchased. > > The paper infeed mechanism has never worked properly. > The device clanks and clunks, then viciously attempts > to slam a blank page into the roller path for processing. > It fails to feed the page about 75% of the time, and > issues the "out of paper" error message. > > I have checked the paper path, tried different paper, > etc etc to no avail. Calls to tech. support in both > the Phillipines and India weren't helpful. > > When the infeed fails, it leaves a mark on the upper > right corner of the blank page that should've been > fed into the device. > > Has anyone encountered this problem with this or similar > HP device? Know of a fix? > > If not, has anyone sucessfully had any lo-end HP print > device replaced under warranty? My 1 year warranty expires > in about 40 days. > > It is an inexpensive device. I do not expect the world of > it. I can live with the software problems. The fact that it > is about 75% dysfunctional as regards a basic paper feed in > the first year of (very, very light) operation is a bit more > than I deem reasonable. > > Any/all suggestions, advice, etc much appreciated. > > Cheers, > David > > ******************************************************************* > ** David Nasser ** [log in to unmask] ** > *******************************************************************; > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.362 / Virus Database: 267.13.3/173 - Release Date: 11/16/2005 > > Do you want to signoff PCBUILD or just change to > Digest mode - visit our web site: > http://freepctech.com/pcbuild.shtml Do you want to signoff PCBUILD or just change to Digest mode - visit our web site: http://freepctech.com/pcbuild.shtml