You need a copy of the BIOS flashing software, typically its a program that will work for a specific BIOS brand, like AMI or AWARD, so it was not written to work only for your board. You usually get this program from your motherboard's website, although it may have shipped with the board if you got a cd with it. If you go to the website make sure you get the one that's right for your BIOS brand. Your motherboard manufacturer might equip different products with a BIOS from a different source, so they will list more than one flashing software in their download section. (I'm making a point about this because I have seen some atrocious download pages.) Anyway, the flash software will have instructions for using it to save the existing BIOS. This is something they generally recommend before you flash a new version into the BIOS, so the flashing software has the backup ability built-in. Tom Turak -----Original Message----- From: Jim [mailto:[log in to unmask]] Sent: Wednesday, September 25, 2002 10:02 PM My motherboard manual recommends that you save a copy of the original BIOS to a bootable floppy disk in case you need to reinstall the original BIOS later. They do not, however, say how this is done. I would appreciate any information on how this is done. Thank you in advance. Jim Markellos Do you want to signoff PCBUILD or just change to Digest mode - visit our web site: http://freepctech.com/pcbuild.shtml