This seems to be a possible case of the cards being "too similar" for your own good... I would have thought the same drivers (from ATI) would have run either... I would try this... Put the card that works back, and get it working again. Change the adapter type to VGA. Put in the Expert@Work98 card in. Change the adapter type to RageProTurboPCI (English) If the build number is not 411.2560 (or higher), go to ATI and get a newer driver... If you have the newest driver, uninstall it from the Start Menu and then re-install it. Rick Glazier ----- Original Message ----- From: "The Ryans de" <[log in to unmask]> > Hi folks, this probably isn't an all to uncommon problem. I've been > trying to change my graphic card from a Macht 64 PCI to a expert@work 98. > The problem is that the expert won't post. I've tried all of the PCI slots > , no post. Any suggestions before I go back to the store and make a fool of > myself. I've heard of M. boards and graphic cards being incompatible but I > want to be sure that that's the problem before I take the card back. Cyrix > 166+ , 64 MB RAM, Award modular bios 4.51PG, The NOSPIN Group provides a monthly newsletter with great tips, information and ideas: NOSPIN-L, The NOSPIN Magazine Visit our web site to signup: http://freepctech.com