Yes, you will need to change the jumper if you want the full size of the harddisk, but only change the jumper won't help to resize the partition. The 2G partition is already there, you can't change it until you delete it and recreate new partition. Software like Partition Magic won't help either, since the 2G is set 100% of the disk. I don't know any software which can help you, unless you know how to hack harddisk partition table and boot sector. Backup seems the only solution, I know you don't like to "destroy" and start over, but the truth is you don't have much choice here. I hope someone else knows how to do it without "destroy". Sorry, I can't help. Jun Qian ----- Original Message ----- From: "Raymond Keirn" <[log in to unmask]> To: <[log in to unmask]> Sent: Saturday, January 06, 2001 5:56 AM Subject: Re: [PCBUILD] To move a harddrive. > > Fujitsu Hdd model # MPB 3032ATU, I wishI could show you a picture but , This > model carries a set of special jumpers > which says ( special mode jumper settings )for each mode - master, slave and > cable select. It limits the number of drive cylinders for all models to > 4,092. > I cannot copy using anything as I only have a cdrom and floppy drive . Is > moving it to a new controller with it`s own bios still an option . The NOSPIN Group provides a monthly newsletter with great tips, information and ideas: NOSPIN-L, The NOSPIN Magazine Visit our web site to signup: http://nospin.com